Kitfort Induction Cooker Error Codes
Kitfort Induction Cooker Error Codes

Kitfort Induction Cooker Error Codes

Kitfort Induction Cooker Error Codes We have collected all the error codes of Kitfort induction cookers with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.

Kitfort Induction Cooker Error Code Solutions

The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error. Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.

Error codeDescriptionCauses and solution
E0You are using cookware that is not suitable for cooking on a hob.Replace the dishes with a suitable one without a ribbed bottom and with a special coating.
E1Failure in the control panel.Turn off the hob for 30 seconds. If after switching on the malfunction does not disappear, contact the service to diagnose the panel; you may need a replacement module.
E3Too high / low voltage.Check the hob connection diagram. She is depicted under the hob. If there were no violations, then there was a power surge.
E4The temperature sensor is defective.Such a problem may arise due to the curved bottom of the dishes or the sensor needs to be changed due to a short circuit. In the first case, replace the dishes and reduce the power of the burner. In the second, contact the service.
E5The backlight on time has been exceeded, the electronics module does not respond.This indicates a short circuit or a malfunction of the module. In the first case, just restart the hob, in the second, call the repair wizard.

Leave a Reply

Your email address will not be published. Required fields are marked *