Samsung Oven Error Codes
Samsung Oven Error Codes

Samsung Oven Error Codes

Samsung Oven Error Codes For kitchens big or small, new or old, Samsung ovens are definitely a popular choice. While they are known for their features and durability, sometimes, there might be some internal problems that are tough to spot. Since the oven is connected to the overall range, problems with the cooktop may also affect your oven.

It is tough to spot errors and then differentiate what errors refer to which part of the range. That is why there are error codes that you can refer to. Usually unplugging the appliance for 2-3 minutes can clear the code. But if there are underlying issues with the components, the errors may persist. Here are the Samsung oven error codes, decoded.

Built-In Electric Wall Oven – Digital Display Single Wall Oven

Samsung Oven Error Code Solutions

Error CodeSolution
C-d0This code occurs if the control key is short for 1 minute. Clean the buttons and make sure there is no water on/around them. Turn off the oven and try again. If the problem continues, contact a local Samsung service center
C-d1This code occurs if the door lock is mispositioned. Touch OVEN OFF, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power.
C-F0This code occurs if communication between the Main and Sub PBA is interrupted. Touch OVEN OFF, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power.
C-F2This code occurs if communication between the Main and Touch is interrupted. Touch OVEN OFF, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power.
C-10The cooking sensor is open when the microwave is operating. The cooking sensor is short when the microwave is operating. Touch OVEN OFF, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power.
C-20The oven sensor is open when the oven is operating. The oven sensor is short when the oven is operating. Touch OVEN OFF, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power.
C-21This code occurs if the internal temperature rises abnormally high. Touch OVEN OFF, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power.
C-23The temp probe sensor is short when the oven is operating. Press OFF, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power
C-30The PCB sensor is open when the oven is operating. The PCB sensor is short when the oven is operating. Touch OVEN OFF, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power.
C-31This code occurs if the PCB temperature rises abnormally high.
C-70The steam sensor is open when the oven is operating. The steam sensor is short when the oven is operating. Press OFF, and then restart the oven. If the problem presists, disconnect all power to the oven for at least 30 seconds and then reconnect the power.
C-72There are drain system-related problems.Press OFF, and then restart the oven. If the problem presists, disconnect all power to the oven for at least 30 seconds and then reconnect the power.
C-A2The cooling motor is operating abnormally.
dCThis code appears if the divider is inserted or removed while the oven is operating. Make sure the divider is inserted properly, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power.
bAd LinEThis code occurs if the power connection is plugged in improperly. Reconnect the power connection properly, and the message disappears.
E-01Open Error
E-02Cooking Time Setting Over Error (Microwave)
E-03Cooking Time Setting Over Error (Grill)
E-04Cooking Time Setting Over Error (Convection)
E-05Cooking Time Setting Over Error (Combination)
E-06Swing Heater Error
E-11Open Gas Sensor Error
E-12Short Gas Sensor Error
E-13T1 Max Time Gas Sensor Error
E-14Dry Up / No Load Gas Sensor Error
E-21Open Temp Sensor Error
E-22Short Temp Sensor Error
E-23T1 Max Time Error
E-24Over Temperature Error
E-25Micro Cook Abnormal Temperature Error
E-26Temperature Not Over AD Error
E-31Open Gas Sensor Error
E-32Short Gas Sensor Error
E-33Under Weight Error
E-34Over Weight Error
E-35Invalid Weight Error
E-36Door Open Error
E-41Open Easy/PH Sensor Error
E-42Short Easy/PH Sensor Error
E-43T1 Max Time Easy/PH Sensor Error
E-44Dry Up Easy/PH Sensor Error
E-45Cooling Error
E-46Primary Open Error
E-47Door Open Error
E-51Sense Failure
E-52EEPROM Short Error
E-53Read/Write Error
E-54Zero Error
E-61Open Humidity Sensor Error
E-62Short Humidity Sensor Error
E-63T1 Max Time Humidity Sensor Error
E-71Steam Sensor Open Error
E-72Steam Sensor Short Error
E-81Communication Open Error
E-82Communication Short Error
E-83Communication Error
E-X1Additional Open Error
E-X2Additional Short Error
SEKey Short Error
TETouch Communication Error
HotMake sure the panel isn’t hot. If the oven is currently too hot for the electronics in the panel to operate, it will display Hot when you try to perform a function. When the oven is a little cooler, this may only happen when certain buttons are touched (like Self Clean) because the oven is still too hot to perform that particular function. The interior lamp will also not function during extreme heat conditions such as a Self Clean cycle, so its button may appear to do nothing in that situation as well.
LocMake sure the panel isn’t locked. The appearance of Control Lock varies between models, but it will usually be displayed as a padlock icon or as the code Loc, or both. Instructions for turning off Control Lock are written on the panel.
Samsung Oven Parts

Samsung Oven Troubleshooting

Samsung works hard to ensure that you don’t have problems with your new electric oven. If you run into unexpected trouble, look first for a solution in the tables below

TroublePossible Cause
The display goes blank.A fuse in your home may be blown or the circuit breaker tripped. Replace the fuse or reset the circuit breaker.
The buttons cannot be pressed properly.There is foreign matter caught between the buttons. Remove the foreign matter and try again.
The oven will not turn on.The oven is not completely plugged into the electrical outlet. Make sure the electrical plug is inserted into a live, properly grounded outlet.
The oven light will not turn on.he light is loose or defective. Tighten or replace the lamp.
The oven smokes excessively during broiling.The oven controls have not been set properly. The meat has been placed too close to the element. The meat has not been properly prepared. Grease has built up on oven surfaces.
Food does not bake or roast properly.The oven controls have not been set correctly. The oven rack has been positioned incorrectly or is not level. Incorrect cookware or cookware of improper size is being used. The oven thermistor needs to be adjusted.
Food does not broil properly.The serving size may not be appropriate. The rack has not been properly positioned. The cookware is not suited for broiling. In some areas, the power (voltage) may be low.
The oven temperature is too hot or too cold.The oven sensor needs to be adjusted.
The oven will not self-clean.The oven temperature is too high to start a self-clean operation. Allow the oven to cool and then reset the controls.
Excessive smoking during a self-cleaning cycle.There is excessive soiling in the oven. Touch OVEN OFF. Open the windows to rid the room of smoke. Wait until the selfcleaning cycle is cancelled. Wipe up the excessive soil and then start the selfcleaning cycle again.
The oven door will not open after a selfcleaning cycle.The oven is too hot. Allow the oven to cool.
The oven is not clean after a self-cleaning cycle.The oven controls were not set correctly. The oven was heavily soiled.
Steam is coming out of the vent.As the number of racks or amount of food being cooked increases, the amount of visible steam will increase. This is normal operation and not a system failure. Use the oven as usual.
A burning or oily odor is coming from the vent.This is normal for a new oven and will disappear in time.
Strong odor.An odor coming from the insulation around the inside of the oven is normal for the first few times the oven is used. Operate the oven empty on the bake setting at 400 °F for 1 hour.
The oven racks are difficult to slide.The shiny, silver-colored racks were cleaned in a selfcleaning cycle. Apply a small amount of vegetable oil to a paper towel, and then wipe the edges of the oven racks with the paper towel.
The oven door is locked.The circuit breaker has been tripped or there was a power failure while the oven door was locked. Activate Control Lockout, and then unlock the control.
Samsung Oven Control Panel

How to set the oven for steam-cleaning?

For light cleaning, the Steam-cleaning function saves time and energy. For heavier duty cleaning, use the self-cleaning function.

How to set the oven for steam-cleaning?
  1. 1. Remove all accessories from the oven.
  2. Pour approximately 10 oz. (300 ml) of water onto the bottom of the empty oven and close the oven door. Use tap water only, not distilled water.
  3. Press Steam Clean.
  4. Press START/SET. When the operation is complete, the display will blink and a beep will sound.
  5. Press OVEN OFF.
  6. Clean the oven’s interior. There will be a significant amount of water remaining on the bottom of the oven after a steam-cleaning cycle. Remove the residual water with a sponge or soft dry cloth.

When steam-cleaning, use exactly 10 oz. of water since this produces the best results.

If you press Steam Clean when the oven temperature is above 100˚F, Hot will appear in the display. Because these functions produce the best results when started while the oven is cool, we recommend that you wait until the oven has cooled down and Hot disappears from the display.

Leave a Reply

Your email address will not be published. Required fields are marked *