Whirlpool Induction Cooker Error Codes Sometimes the induction cooker on the control panel may give a specific error code. Some malfunctions can be repaired manually, while others require specialized intervention from the service center. We will look at common induction cooker error codes.
Whirlpool Induction Cooker Error Code Solutions
| Error Code | Error | Solution |
|---|---|---|
| F0 | An internal error was detected. | Disconnect power. Wait 5 seconds before reconnecting power. If the symbol appears again, call for service. |
| F2 | The surface cooking area is too hot and has turned off. | Remove the pans from the surface cooking area. “F2” will disappear when the surface cooking area has cooled. If you turn the surface cooking area back on and “F2” reappears, the cooktop is still too hot. Turn off the surface cooking area and allow it to cool. |
| F4 | The pot or pan is too close to the control panel. | Make sure the pot or pan is centered on the surface cooking area and nothing hot is on the touch control panel. Wait 5 minutes for the control panel to clear. If “F4” appears after turning the surface cooking area back on, call for service. |
| F8 | The surface cooking area has been in operation too long. | The surface cooking area automatic shutoff was activated. Turn off the surface cooking area. |
| C1 | The power voltage is too low. | Turn off the cooktop. Wait 5 seconds, then turn it back on. If this continues, contact a qualified electrician. |
| C2/C3 | The cooking surface area has overheated. | The surface cooking area automatic shutoff was activated. Wait 5 minutes for it to cool, and then turn it back on. |
Whirlpool Induction Hob Error Codes
| Error Code | Fault |
|---|---|
| F | Sensor |
| F3 | Configuration Sensor |
| F12 | Communication Sensor |
| F22 | Key Sensitivity Error |
e4 error