How to Install Air Conditioner
How to Install Air Conditioner

How to Install Air Conditioner ?

How to Install Air Conditioner ? This manual, with a step-by-step description of the installation work for installing the air conditioner, was developed by a group of craftsmen with rich practical experience. Designed for both professionals and ordinary people. It will become your indispensable assistant!

How to Install Air Conditioner Split?

How to Install Air Conditioner ? Starting to install the air conditioner yourself, you should not forget that you need to approach this issue competently and without haste. It is recommended to start by studying the air conditioner instructions, which describe the main stages of installation. By following the recommendations and doing it carefully step by step, you can achieve an excellent result.

In order not to languish in the summer from the heat, and in the cold period to heat the rooms, you planned to purchase an inverter or conventional split system. Moreover, you want to install and connect it yourself in order to save on professional installation (which is not always the case).

Split system air conditioner installation: step by step

Different brands of split system air conditioner are slightly different, but the installation process is similar for all. Your technician will usually complete the following steps.

Step 1: Secure the mounting brackets

You and the technician need to choose a suitable location for the indoor unit. The ideal location should be reasonably central in the room, not have existing pipes or cables, preferably have studs in the wall for extra support and preferably be out of direct sunlight and away from sources of heat that will affect the air conditioner’s performance.

Once you’ve chosen a location, the mounting brackets that will support the indoor unit can be secured to the wall.

Step 2: Drill holes for the connections

The technician will next mark a hole on the mounting plate and drill a small hole all the way through the wall to the outside. It’s vital to check that there are no electrical or plumbing connections in the part of the wall being drilled.

Step 3: Run the pipes and wiring through

Once the holes are drilled, the technician can feed the electrical wiring, air tubing and drainage lines through. These will connect the indoor and outdoor parts of the system. These lines should be supplied with the system and should already be adequately insulated.

Step 4: Mount and secure the indoor unit

The technician will connect up the indoor part of the system and fix it to the wall on the mounting brackets. They may tilt it back at a slight angle, as this helps with drainage.

Step 5: Mount the outdoor unit

The outdoor condenser unit is the largest and heaviest part of the system, so it needs to be well secured. Ground floor units are normally installed on a new or existing concrete slab. Units on higher floors will need to be secured in strong mounting brackets.

The distance between the indoor and outdoor units should be as close as possible to avoid having to extend the connections, ideally within 15 metres.

Step 6: Connect the outdoor unit

Once the outdoor unit has been secured, the technician will connect the power cable and other lines to the correct outlets. The refrigerant tubing should be vacuumed and tested for leaks before it’s connected.

Step 7: Fix the piping to the wall

If the pipes need to travel along the wall before they reach the outdoor unit, fix them in place securely with clamps that should be provided in the kit.

Step 8: Seal the hole

Now your split system air conditioner installation is complete, the hole in the wall should be sealed using insulating foam to prevent heat loss. Leave the foam to dry for as long as the packaging instructs before turning on your new air conditioner.

Leave a Reply

Your email address will not be published. Required fields are marked *