Amica Refrigerator Error Codes Thanks to the refrigerator error code output system, you can always tell what kind of problem is with the unit. As soon as the malfunction makes itself felt, a combination of letters and numbers appears on the screen, referring to a special table, you can easily identify the malfunction and take measures to eliminate it. It is also useful to inform the master before his arrival so that he prepares everything necessary for the repair.
Amica Refrigerator Error Code Solutions
If all or some of the lights on your refrigerator start to flash after operating or during operation, the refrigerator reports a malfunction.
How to find the error code:
To make it easier for you to find the error code, you can take a photo of your fault and send it to us via WhatsApp.
Error codes for all Amica refrigerators:
E1 – Malfunction of the air temperature sensor in the refrigerator compartment.
E2 – Malfunction of the evaporator sensor in the refrigerator compartment.
E3 – Malfunction of the temperature sensor in the freezer.
E4 – Malfunction of the condenser in the freezer.
Typical malfunctions
Repair of Amica refrigerators has some subtleties, but is generally similar to other brands. Most models are equipped with a diagnostic system – in case of malfunction, an error code is displayed on the screen. But even a smart, modern system cannot detect all inaccuracies in work, so for diagnosis you need to contact professionals. The most common complaints faced by customers are:
- The refrigerator does not turn on. Independently check the state of the output, the presence of voltage. The compressor or control module may also fail.
- The refrigerator does not freeze . Possible causes are malfunctions of temperature sensors, leakage of refrigerant, clogging of the capillary pipeline.
- Formation of ice and snow in the evaporator . Check the condition of the sealing rubber.
- Water accumulates under the refrigerator compartment . A common cause is a clogged drain.
- The refrigerator does not turn off . Temperature sensors, compressor, start relay, weakening of the sealing rubber, a consequence of the lack of refrigerant