Candy Refrigerator Error Codes We have collected all the error codes of Candy refrigerators with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.
Candy Refrigerator Error Code Solutions
The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error. Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.
| Error code | Description | Causes and solution |
|---|---|---|
| E0 | Electronics not working. | The system board is faulty, the contacts are loose. Contact the service center for equipment diagnostics and parts replacement. |
| E01 | The temperature regime is not correct. | The integrity of the seals on the door is broken or freon is leaking out. The service technician will replace the sealing gum and eliminate the refrigerant leak. |
| E02 | The thermostat is defective. | The bellows tube is damaged, as a result of which the motor may not even start. Call a service worker for diagnostics and repair. |
| E03 | Freon leak. | The refrigerant supply pipe is broken, the temperature is high in the chambers. You need to contact the service center to replace the tube and replenish the device with freon. |
| E04 | The temperature sensor shows the wrong temperature. | The thermal sensor has failed, it shows the temperature mode incorrectly. Unload the device, adjust the temperature according to the instructions. |
| E05 | The temperature sensor is not functioning. | The contacts are burnt out or the temperature setting is incorrect. Set the factory settings, contact the service department. |
Candy fridge freezer not working
There are several checks that need to be done so it’s advisable to get a qualified engineer to safely do them for you. The power supply could be an issue here, alongside faulty power sockets, fuses, electrical cord and wiring, or a problem with the circuit breaker.
Damaged seals and gaskets will prevent the appliance from working. A defective thermostat can also cause problems with the operation. Within the freezer compartment, the fan may be blocked. Or the condenser coils might have collected debris preventing the freezer from cooling.
The defrost timer can also cause difficulties – if the compressor motor isn’t set to start within the hour after automatic defrosting then the timer may need repairing or replacing.
Candy fridge freezer not freezing
A freezer not working at the proper temperature can cause potential health risks as foods become warm enough to allow bacterial growth. The ideal temperature for your freezer is – 18 degrees Celsius. A freezer thermometer will enable you to test for this temperature ongoing.
If the condenser coils are dirty, they’ll be unable to dissipate the heat effectively reducing the cooling capacity. Other reasons for the lack of freezing could be related to the evaporator fan motor not working, or the start relay, which gives power to the compressor, malfunctioning.
Candy fridge freezer too cold
This could be due to the defrost heater not working properly. The freezer should be cold enough to freeze your food – too cold and there’s a potential for ice build-up. If the fridge feels warm and the freezer very cold this component is probably the culprit.
Other causes could be a defective evaporator fan motor or an issue with the damper control assembly. All of these Candy fridge freezer repairs can be quickly carried out by a trained appliance repair technician.
Candy fridge freezer drain hole blocked
If the fridge freezer drain hole becomes blocked this can cause other issues with your appliance. The drain hole acts as an outlet for catching moisture, and without this exit, the excess water will pool on the bottom shelf – potentially developing mould and ruining stored food.
Excess water will need to be removed before the drain hole can be cleaned and cleared. If your fridge freezer continues to collect water you may need an experienced engineer to diagnose and fix any more serious problems.
Candy fridge freezer LED light flashing
Flashing lights normally mean that a visit from a service engineer is required. This issue could be caused by a loose connection or a problem with the power supply to the appliance. The power outlet will also need to be checked for the proper voltage. The freezer dial will need to be reset after any problems have been resolved.