How to Replace Refrigerator Button ? Before you begin to replace your door switch, make sure you disconnect the appliance’s power supply. The easiest way to do this is to unplug the unit from the wall. Alternatively, you could trip the appropriate switch in the circuit breaker panel, or you could remove the appropriate fuse from your home’s fuse box.
Refrigerator Button Replacement
If you have not yet found the cause of the problem, it is likely that a stuck or faulty door switch is causing the lightbulb to fail. With the door open, locate the plunger-type switch lever in the door frame. Depress it and release it several times to see if this frees up the action. Over time, these buttons can become stuck from a build-up of dust or dirt, which may require simple cleaning with a cloth and warm sudsy water to loosen it.
Less frequently, the door switch may wear out entirely. If you find no other reason for the light failure, the final fix is to replace the door switch. Often, this switch can be easily pried out of its mounting with a putty knife or flat-head screwdriver. It is usually connected with a pair of wire leads that can easily be unplugged. Buy a replacement switch as specified by the manufacturer, reconnect the wires, and insert the switch back into its socket.
- Unplug the appliance. This is a general safety step for all appliance repair.
- Pry out the old switch. Use a flat head screw to separate the edge of the switch from the inner panel. Then let the whole mechanism hang out.
- Remove the wire harness. Use the screwdriver to compress the tab to the harness so the wires snap free.
- Install the new switch. First, snap the wire harness into place, using the small marking to ensure the sides are properly oriented. Then push the wires back inside the refrigerator panel and press the switch into the hole until it snaps into place.
- Test the switch. Plug the appliance back in and open the fresh food door to ensure the switch is working. You should see both the interior light turn on and the fan start to spin.
How to Replace Refrigerator Button ? As a rule, the spring in the light switch, which is responsible for fixing the switch in the on-off position, fails. The spring flies and the mechanism becomes unusable. To repair the key, you will need to disassemble the element and carefully disassemble it into 2 parts. The switch body consists of two halves, between which you can see a small connection. Use a flathead screwdriver to lift and separate the stem half. Reinstall the spring and reassemble the switch.