Godrej Washing Machine Error Codes Godrej washing machines have digital displays to show information. The digital display shows wash time, washing mode, and any error codes that may occur. Error code E1, E2, E3, E4, E5, or EE will show when the washer encounters a problem. If an error code shows on the display, how do you know what the code means? The list of all fuzzy logic Godrej washing machine error codes and troubleshooting methods are shown below. Below are error codes that occur on most Godrej washers.
Godrej Washing Machine Error Code Solutions
| Error Codes | Meaning |
|---|---|
| E1 | Water does not flow into wash/spin tub in 15 min. Machine will display – E1 error along with beeps. |
| E2 | If the water does not drain from machine the display will show -E2 error along with beeps after 5 minutes of starting drain operation |
| E3 | During spin operation if the lid is open machine will display -E3 error along with beeps. |
| E4 | If there is load unbalance for two times, the machine will try to balance it out automatically. If machine will goes into unbalance third time -E4 error will displayed |
| E5 | During child lock if the lid is open by the child, the machine will give -E5 error along with beeps |
| EE | Water Pressure sensor not working properly during operation the machine will give error -EE with beeps. |
Service Mode or Shortcut Key Function
Short keys: Ok + Start
Procedure: Press and hold for 3 sec
Functions: Line /service test mode: All Led on >> One by One Led on >> CW>>CCW >>Intake on>>Drain on.
Short keys: Left + Down
Procedure: Press and hold for 3 sec
Functions: Child lock
Short keys: Left + Right
Procedure: Press and hold for 3 sec
Functions: Line test mode: Drain On >>> One Minutes spin ON >> Power off.
Short keys: Left + up
Procedure: Press and hold for 3 sec
Functions: Fuzzy data>>> without water and cloths >> this will store the data automatically and power off.
Short keys: Ok
Procedure: Press and hold for 3 sec
Functions: save setting / Favourite
Troubleshooting
Before you call the service person, please check the following:
When your washing machine does not operate:
Check
- Is there a power cut?
If there is a power cut while your machine is in operation, it will reset to REGULAR cycle when the power is restored. Please select the cycle you want and start the laundry operation once again.
- Has your machine’s plug been inserted properly into the main power supply socket?
- Is the water tap turned on properly?
- Has the drainage hose been placed down to allow drainage?
- Is the power switch ON?
- Is the lid securely closed? (When beginning operation from the DRY cycle, your machine will not operate if the lid is open)
When your washing machine leaks:
Check
- Is the hose coupling loose?
- Is the nozzle loose?
- Is the water supply hose connector clogged?
- Is the water inlet nut loose?
When your washing machine makes an unusual noise:
Check
- Is your washing machine installed on an incline or uneven surface?
- Are there any match sticks, hairpins or metal objects being washed with the laundry?
- Has a foreign object got caught under the pulsator? Switch the power OFF and remove the centre screw, then lift the pulsator and look underneath.
- Is the load unbalanced, causing the basket to spin off-centre?
When your washing machine does not drain:
Check
- Has DRY not been selected?
- Is the drainage hose bent?
- Has the drainage hose been placed down to allow proper drainage?
- Is the drainage hose properly connected to your machine?
When your washing machine does not go to DRY cycle:
Check
- Is your washing machine installed on an incline or uneven surface?
- Is the lid closed? ‘ Is the laundry load unbalanced?
- Is the warning light ON?
Don’t worry when
-A small amount of water drains out of the drainage hose the first time you use your washing machine. This is merely the water left over from the performance inspection performed on your washing machine before it was shipped from the factory.
-Buzzing noises occur when the tub fills with water. They are caused by the operation of the water supply valve.
-Sloshing sounds are made by your machine during the DRY cycle.These are made by the water in the Liquid Balancing Ring which is meant to maintain balance of the Spin Tub and does not indicate a malfunction.
-When you restart your machine after opening the lid or pausing the machine during the DRY cycle, there may be a small pause before the machine begins to spin as the drainage valve opens. Also, when you start your machine immediately after stopping it, there will be a short pause. This happens for safe operation.
-If you press the pads when the machine is operating or paused, the machine may return to the beginning of the cycle and lengthen operating time.
-Your machine automatically corrects a load unbalance that occurs during the DRY cycle. If the unbalance is extremely bad, your machine will refill with water and agitate for a moment, and then the DRY cycle will resume.
-This will happen twice. If the load becomes unbalanced a third time, a buzzer will sound 60 times and the WATER LEVEL and CLEAN lamps will light alternater.This alarm also sounds when the water is not draining properly.