Beko Air Conditioner Error Codes When air conditioner status ib abnormal, temperature indicator on indoor unit will blink to display corresponding error code. Please refer to blow list for identification of error.
Beko Air Conditioner Error Code Solutions
| Error Codes | Cause |
|---|---|
| H1 | Means defrosting status. It’s the normal phenomenon. |
| E5 | It can be eliminated after restarting the unit. If not, please contact qualified professionals for service. |
| U8 | It can be eliminated after restarting the unit. If not, please contact qualified professionals for service. |
| H6 | It can be eliminated after restarting the unit. If not, please contact qualified professionals for service. |
| C5 | Please contact qualified professionals for service. |
| F1 | Please contact qualified professionals for service. |
| F2 | Please contact qualified professionals for service. |
Note: If there’re other error codes, please contact qualified professionals for service.
Warning
When below phenomenon occurs, please turn off air conditioner and disconnect power immediately, and then contact the dealer or qualified professionals for service.
- Power cord is overheating or damaged.
- There’s abnormal sound during operation.
- Circuit break trips off frequently.
- Air conditioner gives off burning smeel.
- Indoor unite is leaking.
*Do not repair or refit the air conditioner by yourself.
*If the air conditioner operates under abnormal conditions, it may cause malfunction, electric shock or fire hazard.
| Error | Indus RANNING | Indus SLEEPING | Indus TIMER |
| There are problems with the internal solenoid type temperature sensor | starts blinking | starts blinking | starts blinking |
| Diagnose a room temperature sensor defect | starts blinking | starts blinking | shines |
| There are problems with an external solenoid type temperature sensor | starts blinking | starts blinking | does not shine or blink |
| The fan motor in the indoor unit fails | starts blinking | shines | starts blinking |