Indesit Dryer Error Codes Like their other appliances, Indesit tumble dryer fault codes are pretty easy to spot. Although sometimes fault codes alert for serious issues with the appliance and indicate that service is necessary in most of the cases they just show simple errors which can be easily fixed. Simply consult the list below and you’ll see that, for instance, fault code F04 means you have a jammed pressure switch. Here’s a full list:
Indesit Dryer Error Code Solutions
- F01 – Short circuit motor triac.
- F02 – Motor jammed or fan blocked.
- F03 – Front thermistor open/short circuit.
- F04 – Pressure switch jammed on empty.
- F05 – No feedback from the pump.
- F08 – Static heater relay with contact welded closed.
- F09 – Eprom is not programmed or not functioning.
- F10 – Common of heater open or one shot open.
- F11 – No pump connection.
- F12 – Communication error between boards.
- F13 – Rear thermistor open/short circuit.
- F15 – Dynamic heater relay with contact welded closed.
- F17 – Mater relay welded closed.
Fault codes for Indesit LCD EVO1 Washing machines and washer dryers
- F01 – Short circuit motor triac.
- F02 – Motor jammed tacho detached.
- F03 – Wash thermistor open/short circuit.
- F04 – Pressure switch jammed on empty.
- F05 – Pressure switch jammed on full.
- F06 – Program selector error.
- F07 – Heater relay stuck.
- F08 – Heater relay cannot be activated.
- F09 – Incompatible Eprom.
- F10 – Pressure switch not sensing correctly.
- F11 – Pump cannot be activated.
- F12 – Communication error.
- F13 – Dryer fan or dryer thermistor faulty.
- F14 – Dryer element faulty.
- F15 – Dryer element relay faulty.
- H20 – Not fillings. Check tap, hose and inlet valves.
- LOCKED – Check interlock.
Fault codes for Indesit LCD EVO2 and V4 washing machines and washer dryers
- F01 – Motor triac short circuit.
- F02 – Motor jammed or tacho detached.
- F03 – Wash thermistor open/short circuit.
- F04 – Pressure switch jammed on empty.
- F05 – Pressure switch jammed on full – Check pump for blockages.
- F07 – Heater relay stuck.
- F08 – Heater relay stuck.
- F09 – Setup error.
- F10 – Pressure switch not sensing.
- F11 – Pump cannot be activated.
- F12 – No communication between cards.
- F13 – Drying thermistor open/short circuit.
- F14 – Drying element faulty.
- F15 – Dryer element relay fault.
- F17 – Interlock error.
- F18 – Communication error.
- H20 – Not filling. Check tap, hose and inlet valves.