How to Replace Oven Electronic Board ? This DIY repair guide explains how to replace the oven control board in a gas range. The oven control board controls the oven burners, and houses the digital display. If the range oven won’t bake or broil, or if the display isn’t working, replace the board using a manufacturer-approved replacement part.
Oven Electronic Card Replacement
Turn Off Power to Oven
How to Replace Oven Electronic Board ? This is the single most important step. Wiring to your oven can kill you! Sounds scary but if you shut power off to the oven you will be safe. This is for your safety and to protect the electronics of the oven. Removing power ensures that no wires will be shorted to other metal parts. This is done with the circuit breaker. Find the right one and make sure it turns off all lights in the oven and control panel. If the display is working and you can make the oven beep, it still has power.
Find the Circuit Breaker for your Oven. Turn it off!!! Important!!!
Remove Mounting Hardware
Common Steps for Any Oven Control Board Removal has mounting screws for the support brackets on the sides of the oven door. These can be removed by opening the door and removing the holding screws.
Take Notes and Pictures
Now, the control panel should be loose and you can pull it out to see what is behind the control panel. This is great time to take some notes and pictures. This is quick to do and you will be glad you did once it is time to re-install the control board.
In most cases, as in this one, you will see the control board attached to the front panel. Again, before you remove the control board from the panel or disconnect any wires, it is recommended that you take some snapshots before going any further.
Once the connections are removed and the control board is free, all you have to do is wrap it with some cushioning and put it in a box. Most control boards will be fixed, tested and returned to your door step within a week.