How to Replace Oven Timer ? If you are experiencing any of these issues then the time has come to replace the timer. Whatever the reason though, if you need to replace the timer for your oven, then you will be pleased to know that you have come to the right place! If you are unsure where to start there’s no need to panic. We’ll talk you through how to successfully replace the timer without damaging your oven.
Oven Timer Replacement
How to Replace Oven Timer ?
Safety First
Once you’re ready to start, it’s important to take safety precautions to ensure no one gets hurt during this simple replacement.
Cool Oven and Stove
If you have recently cooked, let your stove and oven cool before beginning the repairs. Just to be sure you don’t accidentally burn yourself or melt your supplies on a hot stovetop.
Unplug Your Oven
Because this is an electrical repair, you will need to disconnect power from your oven to be safe. The easiest way is to pull the plug. Especially since this repair also requires getting behind the oven to work on the back panel.
Push Oven Away from Wall
Carefully pull your oven away from the wall and give yourself enough room/access to stand behind it and reach the back panel.
Remove Manual Buttons (If Any)
Most ovens made today have touch-pad buttons. But if you have an older or unique model with manual buttons, these will need to be removed from the front first.
Take a Photo of Your Buttons
Snap a quick phone photo of your buttons to make sure you get them back on in the right order and alignment later.
Use Screwdriver to Pop Off Buttons
Use a flat-head screwdriver braced on the cloth to pry each button away without damaging your oven finish. Set the buttons aside, as you’ll need them again later.
Remove the Old Clock/Timer
Now you’re ready to remove the old broken part. Ready your screwdriver.
Unfasten Back Panel Mounting Screws
Walk to the back of your oven and identify the mounting screws that secure the top back-plate behind the control panel. Remove these screws and then pull the back plate away. Set the whole set, screws and all, aside to reinstall when you’re finished with the timer.
Identify Your Timer
Identify the oven timer piece, which will be mounted behind where you’re used to seeing the digital display. The easiest way to identify the correct part is to compare it to the replacement part you have ready to go.
Take a Photo of the Wiring
Take a phone photo of how the wiring connects to use as a guide for reinstallation.
Remove the Wiring
Detach the wiring from the old-timer by carefully releasing the wire clip and pulling the two halves apart. You can also use colored electrical tape to ensure you know how to reattach them with the new part.
Unmount the Timer and Toss
There will likely be a mounting bracket and at least one screw holding the timer in place. Unfasten the screws and remove the bracket, then throw away the old-timer.
Reinstall the New Clock/Timer
Next, it’s time to install the new clock and timer piece. Make sure you have removed all the packaging before you begin this step.
Set the New Timer Into Place
Set the new timer into place exactly where the old-timer was located. Make sure it is right-side up and looks identical to the previous installation. Check your phone photos for reference to be confident.
Fasten New Timer with Mounting Screws
Use the mounting screws to fasten the timer and its mounting plate into place. Firmly secure the screws so the part cannot wiggle.
Attach the Wiring According to Your Photo
Check your wiring photo and re-attach the oven wiring to the wiring components of the new timer using the clip mechanism.
Close the Back Panel and Re-Fasten the Mounting Screws
Finally, close up the back panel and re-fasten the screws that hold it in place. Again, secure the screws tightly so your back panel is firmly held.
Return the Manual Buttons (If Any)
If you had manual buttons to begin with, it’s time to reinstall them.
Check Your Photo
Double-check the photo you took to be sure you know exactly where and which direction to place each button.
Push the Buttons Back Into Place
Retrieve your manual buttons and press them onto the new posts provided by the timer.
Test Your Success
With the new part installed and your oven reassembled, it’s time to test your success.
Plug the Oven Back In
Plug your oven back in and push it into place. The timer clock should flash zeroes as if you just experienced a power outage.
Reset the Clock
Use your know-how to reset the oven clock to the current time. If the buttons respond correctly, you have likely done your job well.
Test the Timer
Last but not least, set a short-timer and watch the oven count down to the beep.