Gorenje Washing Machine Error Codes for Gorenje washing machines, unfortunately, are not unified. There are two groups of models of washing machines, each of which has its own independent self-diagnosis system. This is not very convenient, because in order to find out the decoding of the error code that popped up on the display of his Gorenie eraser, he first needs to know which group of models it belongs to, then find the decryption of errors of this group, and only then it will be possible to get reliable information about a specific error. We decided to simplify your task by collecting all the necessary information in one article.
Gorenje Washing Machine Error Code Solutions
Gorenje washing machine fault code F1
If a problem has been detected with the water heating temperature sensor the wash programme will complete, but the water won’t be heated. When this temperature sensor fault is indicated checks will need to be made on the wiring to the temperature sensor itself, the heater, and the wiring to the control module and timer. The thermistor may have to be expertly replaced if faulty.
Gorenje washing machine fault code F2
The issue here is the door lock has been detected as faulty or failing to correctly engage. Checks will need to be carried out on the wiring to the door lock, the door lock itself, and the wiring to the control module or timer. Simply fixed by a trusted repair engineer.
Gorenje washing machine fault code F3
When the washing machine water intake has failed to reach the right level this error code will show – and is detected by the pressure sensor. Initially, the water supply and pressure need to be investigated, followed by the water intake valve wiring and connections, and the sensor wiring and electrical connections. An electrical engineer will also safely check connections to the main control module and timer.
Gorenje washing machine fault code F4
This error code indicates a problem with not spinning. This is often due to the carbon brushes have worn out – and can affect the drum not turning. Other components that need to be checked include the motor tachometer, wiring and connections to the main drive motor, and between the inverter card and the motor. All of these issues can be fixed by an experienced electrical engineer.
Gorenje washing machine fault code F7
Gorenje washing machine problems can include failing to drain – and can stop with water still in it. Before diagnosing the fault, the appliance will need to be drained. The pump filter may be defective or obstructed, the drain outlet hose could be blocked, and the drain pump rotor or wiring might not be working effectively. An appliance repair technician will resolve these problems for you.
For control systems PG1 – PG5
| Error code | Description | Causes and solution |
|---|---|---|
| F1 | The temperature sensor has failed. | Check sensor and heating element. |
| F2 | The boot shaft hatch is not closed. | Close the door again. Make sure that the manhole cover is closed tightly and that the lock is working. |
| F3 | For a certain time, the required water level did not accumulate. | Check the inlet valve, pressure in the water supply system, supply system. |
| F4 | The engine control system has failed. | Diagnose the control unit. Replace if there is a malfunction. |
| F5 | Lost communication between controller and inverter. | Check the operation of the circuit elements. |
| F6 | For a certain time, the water in the tank did not heat up to the desired temperature. | Check the heating element and temperature sensor for serviceability. In case of breakage, replace the element. |
| F7 | Problem with water drain. | Inspect the drain system, hose, filter, pump. Possible clogging of the system. |
| F8 | In spin mode, the drum rotates slowly. | Check drive relay. |
| F9 | Leak detected. | Inspect the washing machine for water leaking into the drip tray. |
For models WA-101 / WA-121 / WA-132 / WA-162 / WA-162Р
| Error code | Description | Causes and solution |
|---|---|---|
| F1 | The temperature sensor has broken. | Diagnostics and sensor replacement. |
| F2 | Water does not enter the machine. | Perhaps a small pressure in the water supply system, the water supply valve is closed, the filter is clogged. |
| F4 | No heating water. | The heating element or temperature sensor has failed. |
| F5 | Waste water does not drain. | Clogged drain system or pump defective. |
| F31 | The tachogenerator is out of order. | Diagnostics of the tachogenerator is needed, if a new one breaks down. |
| F32 | Damage to the motor control circuit. | Diagnose the motor, circuit and its circuits. |
| F41 | Overheating of water in the tank. | Possible damage to the temperature meter or heating element. |
| F43 | The water in the tank heats up too quickly. | Check temperature sensor and heater. |
| F61 | The drum rotates slowly. | Diagnostics of the motor drive relay. |
| F62 | The motor control system is faulty. | Replace the item. |