How to Change Washing Machine Motor ? If there is confidence that the cause of the malfunction is a malfunction of the engine, you can proceed to independent repair work. Before replacing the washing machine motor, the type of motor used is indicated.
Washing Machine Washing Motor Change
How to Change Washing Machine Motor ? It should be noted that models with an invector type are almost impossible to repair on their own. If a collector motor is installed on the machine (old models have asynchronous types, and the rotating winding mechanism is often faulty in them, and the invector ones cannot be repaired by themselves), you can start working. The process is simple and takes place in several stages.
The motor is located at the back of the washing machine under the tank; to dismantle it, you will need to remove the back cover. The next step is to remove the drive belt and unscrew the retaining bolts that secure the motor to the tank and frame of the machine. For free removal of the motor, it is worth slightly raising the tank. If access to the motor is difficult, it is necessary to remove the boron wall of the washing machine. There may be mounting bolts on the side, as the mounting system in different washing machines may vary.
How to replace the motor of a washing machine with your own hands?
Now many people want to know how to replace the washing machine motor with their own hands? As mentioned above, the engine of the machine is the most important part necessary for the rotation of the drum. The motor fails and here, for example, the brushes need to be replaced. In this case, it is necessary to repair the motor of the washing machine. You should know that if you have a minimum of experience and know the design features of such equipment, you can do all the work to replace the engine yourself.
If you do not have such skills, you will not be able to replace the motor of the washing machine. In such a case, it would be best to call our company. Our qualified specialists are always ready to help and do all the work quickly and efficiently. When the washing machine motor does not work, it must be completely replaced. There are several reasons for this: deformation of the rotor or water entering the engine.
To replace the engine, you need to: remove the rear wall it is usually fixed with a few screws. To remove the front, you need to disassemble the control panel. Next, you need to unscrew and remove the top cover. The engine is located at the bottom of the tank.
Fixed on 4 seats. You must remove the drive belt before removing the screws. Then the power cables are disconnected. Then the screws are loosened. When they are removed, you need a screwdriver to remove the places where the engine is screwed into the tank. Such places often stick and the engine cannot be removed. As soon as it moves, it should be pulled towards you.