Teka Washing Machine Error Codes it may show a code on the display. Each code indicates a different issue with your appliance and can often be fixed without calling an engineer. Use the tables below to identify the cause of your code and any possible solutions.
Teka Washing Machine Error Code Solutions
| Error code | Description | Causes and solution |
|---|---|---|
| Error 1 | The boot shaft hatch is not locked. | Re-close the hatch door. Make sure the lock and locking mechanism are in good condition. |
| Error 3 | The temperature sensor has failed. | Check temperature meter. If broken, replace it with a working one. |
| Error 4 | The tubular heater is out of order. | It is necessary to check the operation of the heater. Install a working one in case of breakage. |
| Error 5 | No water is collected. | Make sure that the tap is open, that the pressure in the water supply system is good, that the filter and pump are working. |
| Error 6 | The electronic control module has failed. | Need a diagnosis of the control module, its circuits. Replacement in case of breakage. |
| Error 7 | Faulty control module. | Check electronic control module. |
| Error 8 | Excessive water level in the tank detected. | Make sure the level sensor is working and there is no leakage. |
| Error 9 | Overflowing water in the pan. | Inspect the machine for leaks. If nothing is found, check the water level meter. |
| UNB | Drum imbalance during rotation. | Re-arrange things in the drum or divide them into several washings. During rotation, things come together in one pile creating an imbalance. |
Hi, i am having the error 9 issue, but i dont see any overflowing water in the pan nor was there any leakage. I have also opened the tube hole at the bottom for all water to dispense out. But the error is still happening. Can please advise