Hamilton Oven Error Codes Range/Stove/Oven Fault Codes Self-Clean Convection Freestanding In most cases, a broken timer (aka ERC – the Electronic Range Control) is the primary cause for any failure code you will see. Even if the failure code is for some other component, the issue can still be with the timer (which means the timer is not displaying the proper information). You can contact our experts if you think the timer is broken or not. Our team can help you determine the true source of the problem, whether it is with the timer or another component.
Hamilton Oven Error Code Solutions
| Failure Code | Condition | Check/Repair |
| F0 | Stuck CLEAR/OFF touch pad switch | Unstick switch or replace keypad |
| F1 | Stuck relay on circuit board | Replace board |
| F2 | Control senses oven temp, over 615F with door unlocked, over 9615F with door locked (self clean) | Test oven temperature sensor for continuity, replace if necessary. If oven temperature sensor is OK, replace circuit board |
| F3 | Oven temperature sensor circuit open | Replace oven temperature sensor |
| F4 | Oven temperature sensor circuit shorted | Replace oven temperature sensor |
| F5 | Loss of internal timer safety in the heating mode in bake/broil | Check circuit board, replace if necessary |
| F7 | Shorted touch pad switch, any except up/down arrow and clear/off pads | Replace touch pad |
| FC | Door latch error | Check door latch |
| FD | Shorted meat probe, jack or wires | Check wiring harness and meat probe jack. |
| FF | Loss of door lock circuit protection | Check door lock circuit switch, wiring and circuit board. |